Welcome to Hot Rod Craft

Tom

  • Administrator
Welcome to Hot Rod Craft
« on: November 03, 2012, 01:13:03 PM »
Glad to see ya back !  It's been a while.  ;)

Hot Rod Craft is dedicated to the designers & fabricators who fuel our passion for hot rods.  Built for comfort, built for speed, it's all good.

In addition, we have another message board strictly for the deuce - 1932 Ford.  From gennie to wild; all styles.
The Deuce: http://hotrodcraft.com/forum/thedeuce/index.php

Chopt34

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #1 on: November 03, 2012, 02:32:15 PM »
I am glad you are back!   I can not get my attachments from my Ipad, is there something I need to do different?
Thanks Tom!

duaneshotrods

  • Hero Member
Re: Welcome to Hot Rod Craft
« Reply #2 on: November 03, 2012, 03:23:12 PM »
Glad you're back Tom!
Get the stance right, followed by fit & finish.

HOTRODPRIMER

  • Sr. Member
Re: Welcome to Hot Rod Craft
« Reply #3 on: November 03, 2012, 06:33:25 PM »
Gee Thanks Tom,,,another damn website I'm sure will keep me occupied for hours on end and keep me from being a productive part of society. ;D

Since this is my first post on the new site I thought I would add a photo of my first Hot Rod circa early 70's. HRP

1930 Model A.




pat

  • Newbie
  • Jack off all trades,master of nun!
Re: Welcome to Hot Rod Craft
« Reply #4 on: November 03, 2012, 06:47:33 PM »
Good to see you back.

alan henry davey

  • Sr. Member
Re: Welcome to Hot Rod Craft
« Reply #5 on: November 03, 2012, 09:40:01 PM »
i could not help myself tom . you are a great person , even though we have never met

Chopt34

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #6 on: November 03, 2012, 09:59:12 PM »
I am going to try a photo test following your photo reference of Race car, Custom and a Bike.   
Well I will admit, my black dragster does not qualify as a serious drag car like you have pictured since mine is titled as a passenger car with current Illinois plates, but I guess it is close enough ; )   

Chopt34

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #7 on: November 03, 2012, 10:05:26 PM »
Tom, I tried uploading my engine video from the street dragster, I guess it is too large.  I will email it to you, maybe you can figure out how to upload it.  I do not know how to reduce the size of a video, any ideas?

TS3X65MPH

  • Hero Member
  • THANKS TO MY DAD & MOM,WIFE GLYNIS & SON STEVEN
Re: Welcome to Hot Rod Craft
« Reply #8 on: November 03, 2012, 10:16:48 PM »
TOM,
   LOOKING FORWARD TO YOUR NEW SITE. THOUGHT YOU MIGHT LIKE THIS VIEW.
You Aren't Living If Your Windshield Isn't Dirty.

DavyJ

  • Hero Member
Re: Welcome to Hot Rod Craft
« Reply #9 on: November 04, 2012, 12:47:28 AM »
Tom, glad you finally found some time to create another site. I am sure we will all be quite happy to share pics and stories..................Thanks, your efforts are greatly appreciated
A little teaser of pics
Living life at a 100 smiles per hour!

Tom

  • Administrator
Re: Welcome to Hot Rod Craft
« Reply #10 on: November 04, 2012, 09:25:12 AM »
Tom, I tried uploading my engine video from the street dragster, I guess it is too large.  I will email it to you, maybe you can figure out how to upload it.  I do not know how to reduce the size of a video, any ideas?

I'll have to look into that, this is a new host (InMotion Hosting) plus it's business-class level, so they probably have a video enabler.  You can always upload to YouTube, Vimeo, or Facebook and enter the url to the video in a post.

Tom

  • Administrator
Re: Welcome to Hot Rod Craft
« Reply #11 on: November 04, 2012, 09:26:17 AM »
TOM,
   LOOKING FORWARD TO YOUR NEW SITE. THOUGHT YOU MIGHT LIKE THIS VIEW.

That is so cool, Beppie.  I have to see your coupe in person !  Hopefully soon; my business trips to Palo Alto have lately been pure business, no play time at all  ;D

TS3X65MPH

  • Hero Member
  • THANKS TO MY DAD & MOM,WIFE GLYNIS & SON STEVEN
Re: Welcome to Hot Rod Craft
« Reply #12 on: November 04, 2012, 09:16:51 PM »
I am going to try a photo test following your photo reference of Race car, Custom and a Bike.   
Well I will admit, my black dragster does not qualify as a serious drag car like you have pictured since mine is titled as a passenger car with current Illinois plates, but I guess it is close enough ; )

LOOKS LIKE THE MOVE WENT WELL. GOD YOU WERE BUSY ON THAT STREET FREAK. DO YOU STILL HAVE  THE  32 3W ?
You Aren't Living If Your Windshield Isn't Dirty.

Chopt34

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #13 on: November 05, 2012, 10:22:12 PM »
I am going to try a photo test following your photo reference of Race car, Custom and a Bike.   
Well I will admit, my black dragster does not qualify as a serious drag car like you have pictured since mine is titled as a passenger car with current Illinois plates, but I guess it is close enough ; )

LOOKS LIKE THE MOVE WENT WELL. GOD YOU WERE BUSY ON THAT STREET FREAK. DO YOU STILL HAVE  THE  32 3W ?

It has been a busy year for sure!  I was trying to get the Dragster on the street by this month, but I missed my deadline.  Moving all the cars and shop equipment, including a 4 post lift a couple of thousand miles and starting a new job while designing a couple of cars and a chopper for some pro builders kinda got in the way of some progress on the personal projects.    Yes, I still have both 32's. 

roger

  • Sr. Member
Re: Welcome to Hot Rod Craft
« Reply #14 on: November 10, 2012, 09:55:59 AM »
Tom -

I'm happy to see this site up and running.  I really missed the old site.

hotrodtrux

  • Member
Re: Welcome to Hot Rod Craft
« Reply #15 on: November 13, 2012, 10:41:08 PM »
Thanks for the invite Tom.

Tom

  • Administrator
Re: Welcome to Hot Rod Craft
« Reply #16 on: November 13, 2012, 10:43:11 PM »
Thanks for the invite Tom.

Timm, you need to give us an update on your truck !  Thanks for signing up.

so_dak_kid

  • Member
Re: Welcome to Hot Rod Craft
« Reply #17 on: November 18, 2012, 09:46:26 AM »
Glad your back up and running Tom!

Red

  • Hero Member
Re: Welcome to Hot Rod Craft
« Reply #18 on: November 20, 2012, 10:15:53 AM »
Just dropped by to say hello and offer up a big thank you to Tom for all the hard work involved in getting this and the other two forums on line.... NICE JOB!!

Rice n Beans Garage

  • Member
  • Still building, collecting and breaking stuff.....
Re: Welcome to Hot Rod Craft
« Reply #19 on: November 27, 2012, 07:36:01 PM »
Wow "glad your back" been missing this style format and material for tooooo long !

Thanks for the invite !

it feels like coming home again !
"Don't F*%K with the shop Cat"

Jet Doc

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #20 on: November 28, 2012, 04:19:53 AM »
Tom,
Thanks for the invite. I too have missed the old TSK site, and all the folks that took the time to post there.
Glad to see this one.

Jet Doc

denis4x4

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #21 on: November 28, 2012, 09:56:14 AM »
Appreciate your efforts in getting this site back up.
Traditional hot rodding is thinking outside the box...not a paint by numbers project!

cr55

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #22 on: January 01, 2013, 11:35:47 AM »
I'm new here and looking forward to this site....used to go to the old one a while back but I kinda wandered off....good luck with all you've done Tom...cr

alan henry davey

  • Sr. Member
Re: Welcome to Hot Rod Craft
« Reply #23 on: March 05, 2013, 11:47:57 PM »
thanks tom

Davs tub

  • Sr. Member
Re: Welcome to Hot Rod Craft
« Reply #24 on: March 14, 2013, 09:04:21 AM »
Thanks Tom
daves tub

les jensen

  • Newbie
Re: Welcome to Hot Rod Craft
« Reply #25 on: April 17, 2013, 08:39:15 AM »
Thanks Tom,Les

Re: Welcome to Hot Rod Craft
« Reply #26 on: May 23, 2015, 01:33:39 PM »
REally nice feel and fit Tom.Thanks!…
"Battle Speed!"