Henry Vicky resurrection AKA "Toomuch Trouble"

duaneshotrods

  • Hero Member
Henry Vicky resurrection AKA "Toomuch Trouble"
« on: October 02, 2017, 08:09:50 PM »
Another one of my favorite deuce bodystyles. After being introduced to "Tinngeezer", John on the board, a deal was struck & it was off to Nebraska to meet and pick up a Vicky body.
Get the stance right, followed by fit & finish.

Tom

  • Administrator
    • http://hotrodcraft.com
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #1 on: October 02, 2017, 08:15:38 PM »
Cool !  What are your plans ?

duaneshotrods

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #2 on: October 02, 2017, 08:19:01 PM »
Next up I dusted off and re-assembled my frame table. Test fit the JW Rod Garage rails & crossmember. I picked up a 327, Camaro T5, S 10 tailshaft, and 57 Ford 9".
Get the stance right, followed by fit & finish.

duaneshotrods

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #3 on: October 02, 2017, 08:20:45 PM »
Cool !  What are your plans ?
How 'bout a real lowdown bitchin' driver, with a little California HotRod mixed in for good measure.
Get the stance right, followed by fit & finish.

Tom

  • Administrator
    • http://hotrodcraft.com
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #4 on: October 02, 2017, 08:22:52 PM »
Cool !  What are your plans ?
How 'bout a real lowdown bitchin' driver!

Ha !  Works for me !

duaneshotrods

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #5 on: October 02, 2017, 08:27:16 PM »
Next, the rails need a tweak here & there, flange nuts were welded in for the body & fender mounts, and the rails were boxed.
Get the stance right, followed by fit & finish.

duaneshotrods

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #6 on: October 02, 2017, 08:32:59 PM »
Motor & trans were set in place along with the 9" rear ans some Pete & Jakes ladder bars.
Get the stance right, followed by fit & finish.

duaneshotrods

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #7 on: October 08, 2017, 04:28:45 PM »
Setting up the rear.
Get the stance right, followed by fit & finish.

TS3X65MPH

  • Hero Member
  • THANKS TO MY DAD & MOM,WIFE GLYNIS & SON STEVEN
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #8 on: October 08, 2017, 06:10:59 PM »
Looks good Duane.Your moving along.
You Aren't Living If Your Windshield Isn't Dirty.

Tom

  • Administrator
    • http://hotrodcraft.com
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #9 on: October 08, 2017, 06:18:13 PM »
Looks great as usual, Duane.  Where'd you find such a clean 9" housing ?

duaneshotrods

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #10 on: October 08, 2017, 06:41:07 PM »
Looks great as usual, Duane.  Where'd you find such a clean 9" housing ?
Bought the last one my 9" guy had, just don't know why for the life of me he sandblasted the inside?
Get the stance right, followed by fit & finish.

tingeezer

  • Newbie
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #11 on: October 08, 2017, 08:11:35 PM »
Looking good, can't wait to see the sheet metal come around 8)

jaded iconoclast

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #12 on: October 08, 2017, 08:42:22 PM »
Looks great as usual, Duane.  Where'd you find such a clean 9" housing ?
Bought the last one my 9" guy had, just don't know why for the life of me he sandblasted the inside?
Shit, I don't like the sound of that!

duaneshotrods

  • Hero Member
Re: Henry Vicky resurrection AKA "Toomuch Trouble"
« Reply #13 on: October 09, 2017, 09:10:18 AM »
Looking good, can't wait to see the sheet metal come around 8)
Should be in a couple of weeks John, just have some frame stuff to finish up.
Get the stance right, followed by fit & finish.