Tudor and Victoria interiors

HOTRODPRIMER

  • Sr. Member
Tudor and Victoria interiors
« on: July 10, 2016, 03:05:16 PM »
Currently my interior is minimal and not very pretty but it will suffice for now. HRP


Tom

  • Administrator
    • http://hotrodcraft.com
Re: Tudor and Victoria interiors
« Reply #1 on: July 10, 2016, 03:05:31 PM »
Hey, whatever works HRP !  Looks better than mine ever did.

TS3X65MPH

  • Hero Member
  • THANKS TO MY DAD & MOM,WIFE GLYNIS & SON STEVEN
Re: Tudor and Victoria interiors
« Reply #2 on: July 10, 2016, 03:06:22 PM »
SEDAN BUILT BY PINKEES
You Aren't Living If Your Windshield Isn't Dirty.

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #3 on: July 10, 2016, 03:07:18 PM »
Nice original Tudor interior
Life is like a toilet roll. The closer you get to the end the faster it goes.

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #4 on: July 10, 2016, 03:08:14 PM »
By Sid.
Life is like a toilet roll. The closer you get to the end the faster it goes.

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #5 on: July 10, 2016, 03:10:50 PM »
Vicky
Life is like a toilet roll. The closer you get to the end the faster it goes.

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #6 on: July 10, 2016, 03:11:44 PM »
Tudor
Life is like a toilet roll. The closer you get to the end the faster it goes.

thedeuceguy3

  • Sr. Member
Re: Tudor and Victoria interiors
« Reply #7 on: July 10, 2016, 03:12:13 PM »
My Vicky done by Dan Drumm in the mid 80's
a cold, wet day in a roadster is better than any day at work !

yblock32

  • Member
Re: Tudor and Victoria interiors
« Reply #8 on: July 10, 2016, 03:13:33 PM »
Here's a couple pics of mine



Cranksters Rod & Kustom Club

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #9 on: July 10, 2016, 03:14:36 PM »
Vicky with original front seats
Life is like a toilet roll. The closer you get to the end the faster it goes.

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #10 on: July 10, 2016, 03:15:24 PM »
Vicky
Life is like a toilet roll. The closer you get to the end the faster it goes.

john stimac

  • Sr. Member
Re: Tudor and Victoria interiors
« Reply #11 on: July 10, 2016, 03:16:05 PM »
original interior of my 2-door

IBILTIT

  • Sr. Member
Re: Tudor and Victoria interiors
« Reply #12 on: July 10, 2016, 03:16:52 PM »
Question: are there more than one style of sill plate for these 32's? I've yet to find a decent picture of one, even the pieces that are for sale. I'm seeing them advertised chrome and stainless, rather have the stainless. If anyone has a good picture of one in their Tudor or Victoria....or by itself I would appreciate it. Thanks, Dave

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #13 on: July 10, 2016, 03:18:14 PM »
Hi Dave, The originals were zinc plated steel. The repop ones are stainless steel and I'm sure they are not available in chrome plated steel. Some people can't tell the difference between stainless steel and chrome plated steel. They think if its shinny its chrome. The repops are close but like most repop parts don't fit real well. You will have to trim each end for the windlace. You should be able to see what I mean by the pics. The dull grey one is an original. The repops are pretty flimsy and I'd say 22 gauge. Lets know how you go
Life is like a toilet roll. The closer you get to the end the faster it goes.

IBILTIT

  • Sr. Member
Re: Tudor and Victoria interiors
« Reply #14 on: July 10, 2016, 03:19:00 PM »
I knew you'd come through Graeme, actually you can get new sill plates in chrome ($49) and or zinc plated ($74). I've been looking at so many sites it's getting confusing but I think it's Pacific that's selling them. You can find them on ebay, the seller is American Muscle. I don't know what gauge they are and trimming is not a problem. I probably will go with Stainless if possible and I think Vintique make them. I'll find out soon. Thanks again mate, I appreciate all the pictures ...... Dave   

p.s. hey while you're near, I had another thread that was unanswered. It was about the location of the Vicky rear seat riser, approximately how far back from the B pillar it the front of the riser if you don't mind. I scored a brand new Glide rear seat frame for $200 and just need a starting loc to build from.

flatheadv8s

  • Hero Member
Re: Tudor and Victoria interiors
« Reply #15 on: July 10, 2016, 03:19:18 PM »
Hi Dave, The face of the rear seat riser is 9 3/4" distant from the edge of the B pillar. Hope that helps.Graeme
Life is like a toilet roll. The closer you get to the end the faster it goes.

IBILTIT

  • Sr. Member
Re: Tudor and Victoria interiors
« Reply #16 on: July 10, 2016, 03:19:32 PM »
That was perfect, thanks pardner.....Dave

TS3X65MPH

  • Hero Member
  • THANKS TO MY DAD & MOM,WIFE GLYNIS & SON STEVEN
Re: Tudor and Victoria interiors
« Reply #17 on: February 07, 2018, 01:14:55 AM »
Sedan
You Aren't Living If Your Windshield Isn't Dirty.

TS3X65MPH

  • Hero Member
  • THANKS TO MY DAD & MOM,WIFE GLYNIS & SON STEVEN
Re: Tudor and Victoria interiors
« Reply #18 on: February 07, 2018, 01:17:08 AM »
Sedan
You Aren't Living If Your Windshield Isn't Dirty.

TS3X65MPH

  • Hero Member
  • THANKS TO MY DAD & MOM,WIFE GLYNIS & SON STEVEN
Re: Tudor and Victoria interiors
« Reply #19 on: February 10, 2018, 04:41:56 PM »
Sedan Interior
You Aren't Living If Your Windshield Isn't Dirty.

deucetruck

  • Member
Re: Tudor and Victoria interiors
« Reply #20 on: February 12, 2018, 06:51:11 PM »
My sedan.

deucetruck

  • Member
Re: Tudor and Victoria interiors
« Reply #21 on: February 12, 2018, 06:52:16 PM »
Front seats.